|
Home / Products / CopperJet 1616 |
|
|
CopperJet 1616
ADSL2/2+ VoDSL and VoIP (POTS) IAD
Delivering ADSL/ADSL2 and ADSL2+ enables service providers to offer connections
of more than 24 Mbps downstream with the new CopperJet 16xx series.
The benefits of ADSL2/2+ are higher speeds up to 24 Mbps downstream; Low Power
Mode (LPM) enables overall power savings by entering into sleep mode when the
connection is not being used; Seamless rate adaptation (SRA) enables the system to
change the data rate of the connection without any service interruption; Bonding of
ADSL lines provides higher data rates; Fast startup reduces initialization time; Reach
can be increased with almost 30%.
The CopperJet 1616 is a Voice over ATM Integrated Access Device and can be
upgraded to support Voice over IP (SIPv2). It has proven interoperability with several
Voice Gateways including Cirpack, Paradyne, TDSoft, Siemens, Zhone and Alcatel.
The CJT 1616 supports 1 or 2 POTS/PSTN connections on RJ11 connectors that can
be used for telephony (analog phones), fax or PaBX services using its integrated
residential exchange functions. Active Inbound Call Switching enables the user to
have both his traditional POTS Voice line and the VoDSL line connected to a single
POTS telephone (only for VoATM).
Capable of doing ADSL Annex A, Annex B, U-R2, ADSL2 and ADSL2+, the new
CopperJet 16xx products from Allied Data Technologies increase the deployment of
ADSL in rural areas and fulfill the demand for more bandwidth.
Technical
Specifications |
Size
Dimensions: 120 mm x 40 mm x 170 mm
Weight: 0.4 kg |
Power Supply
External 115-230 VAC, 50-60Hz, 9 Watt |
Environment
Operating Temp: 0° C to 40° C
Storage Temp: -10° C to 70° C
Operating Humidity: 5%–90% non-condensing
Certification / Homologation : CE Mark, IEC 60950 |
Visual Indicators
Power
LAN: Ethernet
USB (only for CopperJet 1616-1P)
WAN: ADSL
Phone: Phone 1, Phone 2 |
WAN Specifications
ADSL Annex A, Annex B RJ11
ITU-T G.992.1 (G.dmt)
ITU-T G.992.3 ADSL2 (G.dmt.bis)
ITU-T G.992.5 ADSL2+ (G.dmt.bis.plus)
ANSI T1.413 i2
G.994.1 (G.hs) |
LAN Specifications
Ethernet 10/100 BaseTX RJ45
USB 1.0 and 1.1 (only for CopperJet 1616-1P)
Bridging: IEEE 802.1d with spanning tree
Routing: Default, Static, RIP1, RIP2
DHCP: Server, Client, Relay |
ATM
ATM AAL5 (data)
Support UBR, CBR, VBR-nrt, VBR-rt
VPI Range (0-4095) and VCI range (1-65535)
Support up to 8 PVCs in bridge mode and 8 PVCs in router mode
Support OAM F4/F5 loopback
RFC2684 (RFC1483), multi-protocol over ATM
RFC2225 (RFC1577), IPoA
RFC2364, PPP over ATM
RFC2516, PPP over Ethernet (over ATM)
Search for Service TR-037
Zero Installation PPP Bridge ZIPB |
Voice over ATM / Voice over IP
1 or 2 x POTS/PSTN FXS (RJ11)
Active Inbound Call Switching for POTS line
Lifeline support
DTMF (tone) dialing
600 Ohm impedance
2 REN per port
Internal Ring Source
Loop Start Signalling
DTMF Detect and Remove
ELCP, CAS, CCS signaling
SIPv2 (RFC 3261), MGCP (RFC 3435), RTP (RFC3550)
SIP DNS, SIP QoS
G.711 compression (64Kbps PCM)
G.726 compression (32Kbps ADPCM)
G.729ab compression (8Kbps ADPCM)
G.168 Echo Cancellation
A-law, u-law encoding
Fax/Data/Voice detect and support
Universal CP Tone Detect
Voice Activity Detect
Silence Insertion Descriptor (SID)
Silence Suppression
Packet Loss Compensation (PLC)
Caller ID (Transmit/ Receive)
Caller ID/Call Waiting (Type-1 and 2)
Flash on/off hook
3 Way call |
Compatibilty
Interoperate with major DSLAM manufacturers
Voice Gateways: Alcatel, Cirpack, CopperCom, Keymile, Paradyne/Jetstream, Siemens, TDSoft, Zhone |
Management
SNMP V1, V2, MIB I, MIB II
Webserver interface
TELNET
Dying Gasp |
Security Features
Stateful Inspection Firewall
Intrusion Detection
Denial Of Service protection
De-Militarized Zone
NAT/NAPT |
Warranty and Support
Five-year warranty |
|
|
|